Product Descriptio
Pos. | Part No | Qty | Parts name | Comments |
708-1L-00670 | [1] | Pump Komatsu China | ||
["SN: 85077-UP"] |$0. | ||||
708-1L-01670 | [1] | Pump Subassembly Komatsu China | ||
["SN: 85077-UP"] |$1. | ||||
1 | 708-1L-32340 | [1] | Shaft Komatsu China | |
["SN: 85077-UP", "SCC: C2"] | ||||
2 | 708-2L-32150 | [1] | Bearing Komatsu | 0.6 kg. |
["SN: 85077-UP", "SCC: C2"] analogs:["7082E12152", "7082L22150", "7082512731"] | ||||
3 | 708-2E-05040 | [1] | Washer Kit Komatsu | 0.101 kg. |
["SN: 85077-UP", "SCC: C2"] analogs:["7082E12190"] | ||||
4 | 708-25-12790 | [1] | Ring, Snap Komatsu | 0.006 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
5 | 708-25-52861 | [1] | Seal, Oil Komatsu China | 0.078 kg. |
["SN: 85077-UP"] analogs:["7082552860", "7067340920"] | ||||
6 | 708-2L-22160 | [1] | Spacer Komatsu | 0.047 kg. |
["SN: 85077-UP"] | ||||
7 | 04065-06825 | [1] | Ring, Snap Komatsu | 0.018 kg. |
["SN: 85077-UP"] | ||||
708-2L-06480 | [1] | Block Assembly Komatsu | 5.26 kg. | |
["SN: 85077-UP", "SCC: C2"] |$13. | ||||
10 | 720-68-19610 | [1] | Pin Komatsu | 0.002 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
11 | 04065-04818 | [1] | Ring, Snap Komatsu OEM | 0.007 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
12 | 708-2L-23131 | [1] | Seat Komatsu | 0.073 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
13 | 708-2L-33160 | [1] | Spring Komatsu | 0.12 kg. |
["SN: 85077-UP", "SCC: C2"] analogs:["7082L23151"] | ||||
14 | 708-7L-13140 | [1] | Seat Komatsu | 0.02 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
15 | 708-2L-23351 | [1] | Guide, Retainer Komatsu OEM | 0.14 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
16 | 708-2L-23360 | [3] | Pin Komatsu | 0.003 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
17 | 708-2L-33361 | [1] | Retainer Komatsu | 0.5 kg. |
["SN: 85077-UP", "SCC: C2"] analogs:["7082L33360"] | ||||
18 | 708-2L-33430 | [9] | Piston Subassembly Komatsu | 0.209 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
708-2L-06630 | [1] | Cradle Assembly Komatsu | 4.3 kg. | |
["SN: 85077-UP", "SCC: C2"] |$25. | ||||
21 | 04020-01228 | [1] | Pin, Dowel Komatsu | 0.026 kg. |
["SN: 85077-UP", "SCC: C2"] analogs:["21T3016190"] | ||||
22 | 01252-61230 | [4] | Bolt, Hexagon Socket Head Komatsu | 0.044 kg. |
["SN: 85077-UP", "SCC: C2"] | ||||
Maintainance
Hydraulic pump maintenance for Komatsu bulldozers is very important to ensure the normal operation of the hydraulic system and extend the service life of the pump. Here are some common Komatsu bulldozer hydraulic pump maintenance recommendations:
Regularly change the hydraulic oil: Hydraulic oil is the key to the normal operation of the hydraulic system. According to the Komatsu bulldozer manual or recommendations, change the hydraulic oil regularly, make sure that the correct type and specifiion of hydraulic oil is used, and follow the recommended replacement intervals.
Check the hydraulic oil filter: The cleanliness of the hydraulic oil filter is essential for the normal operation of the hydraulic pump. Regularly check and clean or replace the hydraulic oil filter to prevent impurities and dirt from entering the hydraulic system.
Check the pump seals: The pump seals (such as seals, gaskets, etc.) must be in good condition to prevent hydraulic oil leakage. Check the pump seals regularly and replace them in time if damage or wear is found.
Check the pump working pressure regularly: Make sure the working pressure of the hydraulic pump is within the normal range. If abnormal pressure is found, adjustment or repair may be required.
Pay attention to the working temperature of the hydraulic pump: Excessive working temperature may cause damage to the hydraulic pump. Make sure the cooling system of the hydraulic system is operating normally to control the working temperature of the hydraulic pump.
Clean the pump and hydraulic system regularly: Clean the hydraulic pump and hydraulic system regularly to remove dirt and impurities. Use appropriate cleaning agents and tools to clean and ensure the normal operation of the hydraulic system.
Please note that these are general maintenance recommendations, and the specific maintenance steps and frequency may vary depending on the model of Komatsu bulldozer. It is recommended to refer to the user manual of the Komatsu bulldozer or consult a professional technician for more detailed and accurate maintenance instructions.
About Xinfeng Machinery (XF) parts:
Advantages
Warehouse Display
Packaging and Delivery
FAQ
1. How to quickly and accurately buy products what lneeded?
A: Provide the original parts number to us to check.
2. How long have you been in the excavator
A: We are engaged in excavator parts since 1998
3. lfI don't know the part number,what shouldI do?
A: Please send us size and pictures of old products.
4. What is the warranty of the products?
A: The warranty is 6/12 Months based on the specific product.
5. How long is your delivery time?
A: The normal delivery time is 3-5 days for stock sproductsafter getting payment. lf not in stock, we will inform you thetime requlred.
6. Which shipping term you can supply?
7. What is your MOQ?
A: Small order and sample order are acceptable
8. Do you have any After-Sales service?
A: Yes!Our