Product Descriptio
 

 

 
About Xinfeng Machinery (XF) parts:
 

 
Maintenance method
1. The lubriing oil maintenance cycle of the rotary motor is 1000 hours. In daily operation, we need to observe the amount of rotary lubriing oil from the dipstick. In some cases, abnormal loss of lubriing oil will be found, so we need to open the large ring gear window. Check whether lubriing oil leaks into the large ring gear cavity through the sealing ring.

2. The general rotation gear inspection and lubriing oil replacement cycle is every 2000 hours or one year. The butter filling amount for a 20-ton machine is about 36 liters (two barrels). Periodically open the boom base and the square cover on the front of the frame. , to check the ring gear and lubriion conditions. For maintenance or if water is found, go to the X overhead cavity at the bottom of the excavator and open the cover to release the water.

3.There is a common misunderstanding among customers about the maintenance of slewing bearings. They believe that the lubriing oil of the slewing bearing is the same as the lubriion cycle of the big and small arms, and they need to be lubried every day. In fact, such actions have the opposite effect. If the lubriion cycle is too short, there will be too much lubriing oil in the bearing, which will burst the dust ring and leak out.
When there is leakage, impurities will also enter the inside of the bearing, which will eventually damage the normal operation of the bearing. recommends slewing bearing lubriion intervals every 250 hours. Beat the butter up and down at the same time. Rotate the machine while beating. A full gun of lubricant every 15 degrees is enough. In different appliions, the lubriion cycle can be appropriately adjusted according to the intensity of your work. Generally, lubriion is sufficient once a week or so.

 
Advantages

 
Warehouse Display

Packaging and Delivery